|
|
 |
|
|
Pipe relining systems
Flexiliner Micro
Pipe diameter 50 to 150 mm, length up to 25 m
Pipe relining system
Tube resin impregnated
Tube insertion
Hardening
System components
 |
felt tube with epoxy hardened resin
on site
using pressure injection, without drum or liner
using steam
in trailer, weight up to 2.0 t
 |
Flexiliner Mini (Flexiliner H)
Pipe cross-section
Length
Pipe relining system
Tube resin impregnated
Hardening
System components
 |
diameter 50 – 300 mm
dependent on various factors like:
resin used
ambient temperature
mixing and dosage system or hand mixing
felt impregnated with epoxy resin
on-site by hand or with mixing and dosage system
using warm water or steam
in trailer, 3 t or 3.5 t
in tandem trailer, weight 3.5 t max.
 |
Flexiliner Midi
Pipe cross-section
Pipe relining system
Tube resin impregnated
Tube insertion
Hardening
System components
Steam heating unit
 |
diameter 100 – 500 mm, pipe length up to 164 m
felt tube impregnated with epoxy resin
on-site by hand or with mixing and dosage system
capacity up to 20 kg/ min.
using liner gun or water inversion
using steam
in light truck with 7 m box construction
weight depends on resin tank volume required
mounted in truck or in separate trailer
 |
Flexiliner Maxi (Flexiliner II Plus / Perfekt)
Pipe cross-section
Lengths
Pipe relining system
Tube insertion
Hardening
System components
Resin impregnation
Hardening system
 |
from diameter 100 mm, upwards unlimited
dependent on various factors like:
resin used
ambient temperature
insertion method
experience up to 250 m available
felt tube impregnated with epoxy resin
injected using liner gun (up to 300 mm)
using steam or water
resin impregnation: stationary or in truck container
hardening system: in trailer approx. 5 t
stationary system or mobile in truck or container
in trailer, approx. 5.0 t
 |
|
|
|
|
